The System is the Solution
The promise of active ERV is great. The execution often falls short due to tough logistics demands, energy loss and the unfamiliarity of mitigators with the installation process.
Purity² set out to eliminate those problems.
Like a duck swimming, Purity² looks simple, but does yeoman work beneath the shiny shell. The air transference and filtration mechanism starts with 6” intake ducts bringing dirty, radon-filled air into the system. Air is routed through the heat exchanger before being discharged above the roof. Fresh clean air is pulled in, filtered and distributed in the house as clean, pollutant and radon-free air, at the approximate temperature of the air it replaced. The energy the homeowner has already paid for to heat or cool their home remains. The only thing taken out of the air are pollutants and radon.
Elimination of Radon + Pollutants = Purity²
All Purity² Systems use heat exchangers to energy-efficiently bring in filtered and temperature conditioned outside air.
Select the System Matched to Your Needs:
Purity²
The whole house solution. Purity² mitigates radon in the home while also purifying indoor air to make the entire indoor environment healthier and more pleasant to live in.
By taking a system approach to ERV, mitigators have an easier time ordering and installing. At the same time, the ability of Purity² to also mitigate indoor air pollution makes the entire system easier, and more profitable, for mitigators to sell.
Provides 1 ACH (Air Change Per Hour) per 1,648 sq. ft. in areas with 7.5 ft. Ceiling.
See Purity² Specs Here
When mounted in the basement, or a main floor room, these ERV units are easier to install and more affordable than ASD.
Purity² Mini
Since Radon enters homes through soil below the home, the Purity² Mini can be mounted in basements or main floor, as appropriate, to provide an easier to install and far less expensive alternative to ASD. This is especially helpful when basement floors or walls exhibit cracks.
Great for smaller jobs. A ductless through the wall solution with filtration and heat exchanger contained within a single 6” PVC tube. The interior face has pleasing, contemporary design.
1 ACH (Air Change per Hour) in 300 sq. ft. room with 7.5 ft. ceiling.
See Purity² Mini Specs Here
Purity² Max
Since Radon enters homes through soil below the home, the Purity² Max can be mounted in basements or main floor, as appropriate, to provide an easier to install and far less expensive alternative to ASD. This is especially helpful when basement floors or walls exhibit cracks.
Great for larger jobs. Our easiest to install ERV unit mounts to a wall with two 4” holes (for intake and exhaust vents) on any exterior wall. Ideal for apartments and small homes.
1 ACH (Air Change per Hour) per 755 sq. ft. = 1/2 ACH per 1,500 sq. ft. with 7.5 ft. ceiling